Bond-It | Contact Adhesive
Bond-It High Strength Spray Adhesive is a non-chlorinated, exceptionally powerful, long-lasting, multi purpose adhesive. Bond-It High Strength Spray Adhesive is ideal for the fixing of carpets, carpet tiles, cork tile, underfelts, minor floor installations and much more.
Supplied in 500ml Aerosol Tins.
Bond-It High Strength Spray Adhesive is suitable for use on materials such as fabrics, wood, concrete, metal, plastic, rubber, paper, card and is particularly suited to bonding foam to foam.
Bond-It High Strength Spray Adhesive does not contain damaging or harmful materials such as CFC's or Methylene Chloride (Dichloromethane).
Bond-It High Strength Spray Adhesive is fitted with a variable discharge nozzle that controls the width of the spray fan; the more pressure applied to the nozzle the wider the fan. It is ideal for the fixing of carpets, carpet tiles, cork tile, underfelts and minor floor installations, for use in the furniture and automotive industries, especially for bonding foam to a variety of surfaces.
It's also suitable for use in repair and non-structural applications where a high strength bond is required.
Note: This product should not be used for construction purposes such as unsupported head linings in vehicles and boats.
It is NOT suitable for use with Non Rigid / Plasticised PVC and should not be used on surfaces where temperatures may exceed 50°C.
Take the usual labour hygiene into account.
PPE should be worn during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
SHAKE WELL BEFORE USE. ONLY USE IN WELL VENTILATED AREAS.
Ensure surfaces are clean, dry and free from any contaminates that may hinder adhesion. For best results, use in temperatures between 15°C and 25°C.
Apply to the surface holding the can approx. 25cm away. For a strong bond apply to both surfaces, for a lighter bond apply to only one.
Leave the solvent content of the adhesive to evaporate for 3 - 5 minutes before bringing the surfaces and applying pressure, working outwards from the centre.
Excess adhesive can be removed by using Soudal Adhesive Remover. When finished, invert the can and spray for a few seconds in order the clear the valve ready for the next use.
Not recommended for use on polystyrene or plasticised PVC.
We've added to your cart