AquaSolve-Pro Masonry Waterproofing Cream

AquaSolve-Pro Masonry Waterproofing Cream

Platinum Building Chemicals Ltd | Water Repellent

New Product Penetrating Damp Water Repellents

AquaSolve-Pro Masonry Waterproofing Cream is a deeply penetrating water-repellent cream used for the protection of masonry.

AquaSolve-Pro Masonry Waterproofing Cream is a thick, white cream which is ready to use and applied by brush, roller or airless spray.

AquaSolve-Pro Masonry Waterproofing Cream penetrates into brickwork, masonry, mortar and concrete, where it will cure to a colourless, natural finish, lasting for up to 20 years.

Supplied in 5 Litre Buckets

Advantages

AquaSolve-Pro Masonry Waterproofing Cream

  • Waterproofs Masonry

  • Deeply Penetrating

  • Breathable

  • Durable - Lasts for up to 20 years

  • Single coat application

  • Energy saving

Preparation

Substrate Preparation:

AquaSolve-Pro Masonry Protection Cream should be applied to dry, porous surfaces. It should not be applied over sealed or painted surfaces and is intended for above ground use only.

Apply when rain is not forecast for the next 24 hours.

For the treatment to be successful it is necessary to check all joint and roof connections.

Hairline cracks up to 0.3 mm can be ‘bridged’ by AquaSolve-Pro Masonry Protection Cream, however, it may be necessary to fill wider cracks in brick / stonework and re-point using a suitable cement or lime based mortar.

After any re-pointing work it is advisable to wait 7 - 14 days for the mortar to cure before application of AquaSolve-Pro Masonry Protection Cream.

Dirty surfaces should be cleaned before the application of AquaSolve-Pro Masonry Protection Cream to the recommendations given in BS 8221-1:2000, (Code of practice for cleaning and surface repair of buildings. Cleaning of natural stones, brick, terracotta and concrete.)

Remove any loose mortar, dust etc., using a masonry brush.

When biological growth such as moss, algae or lichen needs to be removed, apply one of our Masonry Biocide Products in accordance with instructions.

Application to structures containing high levels of salt should be avoided.

Test Area:

AquaSolve-Pro Masonry Protection Cream has been formulated to be colourless once cured.

Slight darkening may occur when it is applied to some substrates, which will usually fade over time.

It is recommended that a small test area is treated before full application begins.

Application

Application:

Apply by brush, roller or spray. Larger areas can be covered more quickly using roller application.

Details such as around windows are best covered by brush. Care should be taken to ensure that AquaSolve-Pro Masonry Protection Cream does not splash onto glass, paintwork, plants, etc. Any splashes should be cleaned away with warm soapy water.

AquaSolve-Pro Masonry Protection Cream appears white immediately after treatment – making it easy to tell which areas have been treated.

After 15 - 20 minutes from application, AquaSolve-Pro Masonry Protection Cream starts to penetrate into the masonry and the whiteness will fade.

After 24 - 48 hours the wall will have returned to its original appearance.

As AquaSolve-Pro Masonry Protection Cream is formulated to penetrate deeply into masonry it can take up to two months for a noticeable 'beading effect' to appear when rainfall strikes the wall.

The masonry will be resistant to light rain after 2 - 4 hours.

Coverage:

Approx 5 m² per litre, however this can be greatly reduced depending of the porosity of the substrate. Single coat application.

Health & Safety Recommendations:

Take the usual labour hygiene into account.

PPE should be worn during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Data Sheets

Technical Data Sheet

Safety Data Sheet

More on this product...

£73.50 ex. VAT | £88.20 inc. VAT

  • Reviews

Related Items

  • AquaSolve-Pro Masonry Waterproofing Cream

    AquaSolve-Pro Masonry Waterproofing Cream

    £73.50 ex. VAT | £88.20 inc. VAT