DampSolve Damp Proofing Cream is a highly effective silicone emulsion cream for injection into brickwork etc. for the control of rising dampness.
DampSolve Damp Proofing Cream can be used in all types of masonry without the use of high pressure equipment
DampSolve DPC Cream Special Properties:
DampSolve - 5 Litre Tub: Applied by use of the Osatu Tango 7 DPC Pressure Pump.
Once in the substrate, the cream migrates into the masonry pores and rapidly reverts to a liquid phase.
Polysiloxanes are formed in situ and the curing of the DPC starts immediately with a final cure within 2-6 weeks depending on the wall thickness.
DampSolve Damp Proofing Cream will perform as well as any conventional solvent based injection system against rising damp.
4 1/2" (110mm)
13 1/2" (330mm)
|Application Rate Per 10M||0.9L||1.9L||2.9L||3.9L|
Allow for up to 10% Wastage, this may be due to the possibility of cream being drawn into cavities, over-filling etc...
Product Data Sheets:
This Product is BBA Approved. Agrément Certificate No: 10/4781.