T-Rex® Power Adhesives

T-Rex® Power Adhesives are a range of ultra-strong gap filling Grab Adhesive with extremely high initial grab, using Soudal's unique Fibre Reinforced Technology which improves strength and gap filling properties. T-Rex® is a global brand from Soudal. It is a professional adhesive range, which updates the classic grab adhesive category with innovative Fibre Reinforced Technology. T-Rex® Power is available in both Solvent-Based and... Read More

T-Rex® Power Adhesives

T Rex® Power Adhesive - Solvent Based
Quick Look

T Rex® Power Adhesive - Solvent Based

£1.75 ex. VAT | £2.10 inc. VAT

T Rex® Power Adhesive - Solvent Based

T Rex® Power Adhesive - Solvent Based

Soudal | Grab Adhesive

Soudal T-Rex® - Solvent Based is an ultra-strong, gap filling grab adhesive with extremely high initial grab using Soudals unique 'Fibre Reinforced Technology' which improves strength and gap filling properties.

Soudal T-Rex - Solvent Based is suitable for all types of bonding, interior and exterior, porous and non-porous, vertical and horizontal, overhead (with support where necessary) and uneven surfaces.

Benefits
  • Fibre Reinforced.

  • Excellent initial grab (at least 125kg/m², full surface bonding) for fast and direct bonding.

  • Very fast powerful bonding.

  • Direct application onto one substrate.

  • Replaces nails and screws.

  • Suitable for bonding on uneven surfaces.

  • Excellent adhesion on a wide range of construction materials both in interior and exterior applications.

Application

Typical Applications:

  • Suitable for the bonding of decorative materials, skirting boards, gypsum panels in vertical, horizontal and overhead applications.

  • Bonding of carpet grippers, edge strips and aluminium and uPVC stair nosings.

  • Bonding of wall and floor boards, window frames and partitions.

  • Suitable for direct bonding of many materials such as wood, many plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB, timber panels, chipboard etc.

Surface Preparation:

Surfaces should be clean, dry and free of dust. Prime if the surface is too porous.

Application Method:

Apply the adhesive by means of a caulking gun onto one surface in strips or dabs.

Always apply adhesive to the edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required on a vertical fixing or for heavy components.

For the bonding of impervious or heavy materials use the transfer method: press components together and release for max. 5 min. Return parts together and batten down with a rubber hammer.

If necessary support until adhesive is completely cured (approx. 24-48 hours).The bond can be loaded after 24-48 hours.

Remarks:

  • When bonding, the pressure applied determines the initial grab and the final bonding strength. The duration during which pressure is applied is less important.

  • In case of overhead applications a combination with mechanical fixing is required.

  • Do not use as a mirror adhesive (Use Soudaseal Mirror).

  • Do not use in applications where continuous immersion is possible.

Data Sheets

Technical Data Sheet

T-Rex Leaflet

Safety Data Sheet

£1.75 ex. VAT | £2.10 inc. VAT

T-Rex® Power High Strength Grab Adhesive (Solvent-Free) - 310ml Cartridge
Quick Look

T Rex® Power Adhesive - Solvent Free

£1.75 ex. VAT | £2.10 inc. VAT

T Rex® Power Adhesive - Solvent Free

T Rex® Power Adhesive - Solvent Free

Soudal | Grab Adhesive

Soudal T-Rex® - Solvent Free is an ultra-strong, gap filling grab adhesive with extremely high initial grab (>300kg/m²) using Soudals unique 'Fibre Reinforced Technology' which improves strength and gap filling properties.

Soudal T-Rex® - Solvent Free is especially suited for use on porous materials in comparison to any Solvent Based Grab Adhesive.

Soudal T-Rex® - Solvent Free is suitable for all types of bonding, interior and exterior, vertical and horizontal, overhead (with support where necessary) and uneven surfaces.

Benefits
  • Fibre Reinforced

  • Initial Grab - Higher than 300kg/m²

  • EC-1R Plus label: Very low emission values

  • Solvent-Free

  • Suitable for bonding on uneven surfaces

  • Direct application onto one substrate

  • Excellent adhesion on a wide range of construction materials both in interior and exterior applications

Application

Typical Applications:

  • Suitable for immediate and rock solid bonding of many materials such as wood, many plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB, timber panels, chipboard etc.

  • Suitable for the bonding of decorative materials, skirting boards, gypsum panels in vertical, horizontal and overhead applications.

Surface Preparation:

Surfaces should be clean, dry, free of dust and loose particles.

At least one of the substrates should be porous otherwise the curing rate will be significantly slower.

Application Method:

Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15cm for panels).

Always apply adhesive to the edges and corners of panels.

Press the surfaces together immediately and tamp down with a rubber hammer.

Support may be required. The bond can be loaded after 24-48 hours.

Remarks:

  • When bonding, the pressure applied determines the initial grab and the final bonding strength. The duration during which pressure is applied is less important.

  • Do not use as a mirror adhesive (Use Soudaseal Mirror).

  • Do not use in applications where continuous immersion is possible.

Data Sheets

Technical Data Sheet

T-Rex Leaflet

Safety Data Sheet

£1.75 ex. VAT | £2.10 inc. VAT