Expanding Foam

SOUDAFOAM Expanding Foam is the brand of the World’s largest independent polyurethane foam manufacturer. Every week more than 2 million canisters of PU Foam are manufactured in Soudals state of the art production facilities. SOUDAFOAM Expanding Foam is a structured range focusing on application specific solutions, with a focus on quality, innovation and value for money. Here you will find... Read More

Expanding Foam

Soudafoam 'Gap Filler'
Quick Look

Soudafoam 'Gap Filler'

£3.95 ex. VAT | £4.74 inc. VAT

Soudafoam 'Gap Filler'

Soudafoam 'Gap Filler'

Soudal | Expanding Foam

Soudafoam Gap Filler is a General Purpose Polyurethane Expanding Foam Filler with Gap Filling Formulation and high 3D expansion. Easy to use, one component with rapid curing.

Soudafoam Gap Filler has excellent thermal and acoustic insulation properties with primerless adhesion on most construction materials.

Product Features

Duravalve™:

This product is supplied in Gun Grade cans with DuraValve™

DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.

DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.

Benefits:

  • Excellent adhesion on most substrates (except PTFE, PE and PP).

  • High insulation value, thermal and acoustic.

  • High filling capacities.

  • Excellent stability (no shrink or post expansion).

  • Very good bonding properties.

Properties:

  • Product Basis: Polyurethane Foam Filler

  • Volume Yield FEICA TM1002 (750ml Cannister): 34 Litres

  • Acoustic Rating ISO 717-1: 58 dB

  • Thermal Conductivity DIN 52612: 37mW/mK

  • Fire Class (DIN4102): B3 Fire Rated

  • Application Temperatures: +5°C to +30°C

Application

Typical Applications:

  • General Purpose Gap Filling

  • Pipe Penetrations

  • Insulation and Roofing Materials

  • General Construction

Preparation:

Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

Moisten surfaces with a water sprayer prior to application.

For non-conventional substrates a preliminary adhesion test is recommended.

Application Method:

Fill holes and cavities approximately ¾ full as the foam will expand.

Repeat shaking regularly during application.

If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

Health & Safety Recommendations:

Take the usual labour hygiene into account.

Always wear gloves and goggles during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Data Sheets

Technical Data Sheet

Safety Data Sheet

£3.95 ex. VAT | £4.74 inc. VAT

Soudafoam 'Gap Filler XTRA' - Gun Grade High Yield Expanding Foam - 750ml Tin
Quick Look

Soudafoam 'Gap Filler XTRA'

£4.75 £3.50 ex. VAT | £5.70 £4.20 inc. VAT

Soudafoam 'Gap Filler XTRA'

Soudafoam 'Gap Filler XTRA'

Soudal | Expanding Foam

Soudafoam 'Gap Filler XTRA' is a HIGH YIELD Polyurethane Expanding Foam Filler with Gap Filling Formulation and Optimised 3D expansion.

The Soudafoam 'XTRA' High Yield Formulation means improved value for money versus the Standard Soudafoam Gap Filler, up to 50% more litres of filling per cannister.

Soudafoam 'Gap Filler XTRA' has excellent thermal and acoustic insulation properties with primerless adhesion on most construction materials.

Product Features

Duravalve™:

This product is supplied in Gun Grade cans with DuraValve™

DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.

DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.

Benefits:

  • Excellent adhesion on most substrates (except PTFE, PE and PP).

  • Extra High Yield - up to 50% more litres of filling compared to Standard Soudafoam Gap Filler

  • High insulation value, thermal and acoustic.

  • High filling capacities.

  • Excellent stability (no shrink or post expansion).

  • Very good bonding properties.

Properties:

  • Product Basis: Polyurethane Foam Filler

  • Volume Yield FEICA TM1002 (750ml Gun Grade Cannister): 51 Litres

  • Acoustic Rating ISO 717-1: 58 dB

  • Thermal Conductivity DIN 52612: 37mW/mK

  • Fire Class (DIN4102): B3 Fire Rated

  • Application Temperature: +5°C to +30°C

Application

Typical Applications:

  • General Purpose Gap Filling

  • Pipe Penetrations

  • Insulation and Roofing Materials

  • General Construction

Preparation:

Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

Moisten surfaces with a water sprayer prior to application.

For non-conventional substrates a preliminary adhesion test is recommended.

Application Method:

Fill holes and cavities approximately ¾ full as the foam will expand.

Repeat shaking regularly during application.

If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

Health & Safety Recommendations:

Take the usual labour hygiene into account.

Always wear gloves and goggles during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Data Sheets

Technical Data Sheet

Safety Data Sheet

£4.75 £3.50 ex. VAT | £5.70 £4.20 inc. VAT

Soudafoam One Shot - Single Use Expanding Foam - 150ml Tin
Quick Look

Soudafoam 'One Shot'

£2.69 ex. VAT | £3.23 inc. VAT

Soudafoam 'One Shot'

Soudafoam 'One Shot'

Soudal | Expanding Foam

Soudafoam One Shot is a Professional Quality Hand Held Polyurethane Expanding Foam Filler with Large Volume Gap Filling Properties and high 3D expansion. Soudafoam One Shot is easy to use, one component with rapid curing.

The small format packaging is designed for single-use applications and is particularly useful in 'hard-to-reach' areas with limited space for larger type cannisters.

Soudafoam One Shot has excellent thermal and acoustic insulation properties with primerless adhesion on most construction materials.

Product Features

Benefits:

  • Excellent adhesion on most substrates (except PTFE, PE and PP).

  • High insulation value, thermal and acoustic.

  • High filling capacities.

  • Excellent stability (no shrink or post expansion).

  • Very good bonding properties.

Properties:

  • Application Type: Hand Held Application

  • Product Basis: Polyurethane Foam Filler

  • Volume Yield FEICA TM1002 (150ml Cannister): 4 - 5 Litres

  • Acoustic Rating ISO 717-1: 58 dB

  • Thermal Conductivity DIN 52612: 37mW/mK

  • Fire Class (DIN4102): B3 Fire Rated

  • Application Temperatures: +5°C to +30°C

Application

Typical Applications:

  • Installing of window and door frames.

  • Filling of cavities.

  • Sealing of all openings in roof constructions.

  • Apply of an acoustic baffle

  • Improving thermal isolation in cooling systems.

Preparation:

Shake the aerosol can for at least 20 seconds. Surface should be free from grease and dust.

Moisten surfaces with a water sprayer prior to application.

For non-conventional substrates a preliminary adhesion test is recommended.

Application Method:

Fill holes and cavities approximately ¾ full as the foam will expand.

Repeat shaking regularly during application.

If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

Health & Safety Recommendations:

Take the usual labour hygiene into account.

Always wear gloves and goggles during application. See our Safety & PPE Products.

Consult label and material safety data sheet for more information.

Data Sheets

Technical Data Sheet

Safety Data Sheet

    £2.69 ex. VAT | £3.23 inc. VAT

    Soudafoam 'Window & Door Premium'
    Quick Look

    Soudafoam 'Window & Door Premium'

    £4.25 ex. VAT | £5.10 inc. VAT

    Soudafoam 'Window & Door Premium'

    Soudafoam 'Window & Door Premium'

    Soudal | Expanding Foam

    Soudafoam Window & Door is a Premium Grade, Polyurethane Expanding Foam Filler. This Soudafoam Window & Door Filling Formulation with high linear expansion is easy to use, one component with rapid curing.

    Soudafoam Window & Door has excellent thermal and acoustic insulation properties with primerless adhesion on most construction materials.

    Product Features

    Duravalve™:

    The Gun Grade cannisters of this product are fitted with DuraValve™.

    DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.

    DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.

    Benefits:

    • Excellent adhesion on most substrates (except PTFE, PE and PP).

    • High insulation value, thermal and acoustic.

    • High filling capacities.

    • Excellent stability (no shrink or post expansion).

    • Very good bonding properties.

    Properties:

    • Product Basis: Polyurethane Foam Filler

    • Linear Yield FEICA TM1002 (750ml Cannister): 26 Metres

    • Acoustic Rating ISO 717-1: 58 dB

    • Thermal Conductivity DIN 52612: 37mW/mK

    • Fire Class (DIN4102): B3 Fire Rated

    • Application Temperatures: +5°C to +30°C

    Application

    Typical Applications:

    • Installation of Window and Door frames

    • Filling of cavities

    • Sealing of all openings in roof constructions

    • Apply of an acoustic baffle

    • Improving thermal isolation in cooling systems 

    Preparation:

    Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

    Moisten surfaces with a water sprayer prior to application.

    For non-conventional substrates a preliminary adhesion test is recommended.

    Application Method:

    Fill holes and cavities approximately ¾ full as the foam will expand.

    Repeat shaking regularly during application.

    If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

    Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

    Health & Safety Recommendations:

    Take the usual labour hygiene into account.

    Always wear gloves and goggles during application. See our Safety & PPE Products.

    Consult label and material safety data sheet for more information.

    Data Sheets

    Technical Data Sheet

    Safety Data Sheet

    £4.25 ex. VAT | £5.10 inc. VAT

    Soudafoam 'Window & Door XTRA' - Gun Grade Premium High Yield Expanding Foam - 750ml Tin
    Quick Look

    Soudafoam 'Window & Door XTRA'

    £5.20 ex. VAT | £6.24 inc. VAT

    Soudafoam 'Window & Door XTRA'

    Soudafoam 'Window & Door XTRA'

    Soudal | Expanding Foam

    Soudafoam Window & Door XTRA is a Premium Grade, HIGH YIELD, Low Expansion Polyurethane Expanding Foam Filler which is recommended for filling gaps around Windows and Doors as it provides thermal and acoustic insulation around Window & Door Frames.

    The Soudafoam XTRA Yield Formulation means improved value for money versus Standard Soudafoam Window & Door Foam, up to 50% more linear metres of filling per cannister.

    There is also less wastage as the product does not expand outside the joint dimensions, if used correctly.

    Product Features

    Duravalve™:

    This product is supplied in Gun Grade cans with DuraValve™.

    DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.

    DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.

    Benefits:

    • Excellent adhesion on most substrates (except PTFE, PE and PP).

    • High insulation value, thermal and acoustic.

    • Low Expansion

    • Excellent stability (no shrink or post expansion).

    • Very good bonding properties.

    Properties:

    • Product Basis: Polyurethane Foam Filler

    • Linear Yield FEICA TM1002 (750ml Gun Grade Cannister): 39 Metres

    • Acoustic Rating ISO 717-1: 58 dB

    • Thermal Conductivity DIN 52612: 37mW/mK

    • Fire Class (DIN4102): B3 Fire Rated

    • Application Temperatures: +5°C to +35°C

    Application

    Typical Applications:

    • Installing of window and door frames

    • Filling of cavities

    • Sealing of all openings in roof constructions

    • Apply of an acoustic baffle

    • Improving thermal isolation in cooling systems

    Preparation:

    Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

    Moisten surfaces with a water sprayer prior to application.

    For non-conventional substrates a preliminary adhesion test is recommended.

    Application Method:

    Fill holes and cavities approximately ¾ full as the foam will expand slightly.

    Repeat shaking regularly during application.

    If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

    Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

    Health & Safety Recommendations:

    Take the usual labour hygiene into account.

    Always wear gloves and goggles during application. See our Safety & PPE Products.

    Consult label and material safety data sheet for more information.

    Data Sheets

    Technical Data Sheet

    Safety Data Sheet

    £5.20 ex. VAT | £6.24 inc. VAT

    Soudafoam 'Window & Door SWS' - Gun Grade Flexible Expanding Foam - 750ml Tin
    Quick Look

    Soudafoam 'Window & Door SWS'

    £6.95 ex. VAT | £8.34 inc. VAT

    Soudafoam 'Window & Door SWS'

    Soudafoam 'Window & Door SWS'

    Soudal | Expanding Foam

    Soudafoam Window & Door SWS is a Premium Quality, Airtight, Acoustic and Thermal Insulation Foam Filler for use around Windows and Doors.

    Soudafoam Window & Door SWS is recommended for all A, A+ and A++ Rated windows and doors. Vastly improved thermal and insulation properties and totally airtight after curing.

    Soudafoam Window & Door SWS is highly flexible once cured, based on FLEXIFOAM® Technology, which gives improved durability.

    The elastic properties in this product allow the foam to follow the movement of the joint and keep its insulation properties for many years.This product can be used at temperatures between -10°C to +30°C.

    Soudafoam Window & Door SWS is a one-component Polyurethane Foam with rapid curing and primerless adhesion on most construction.

    Product Features

    Soudal Window System (SWS):

    'Soudafoam Window & Door SWS' is a product which is part of the Soudal Window System (SWS).

    The professional window-joint system SWS is a combination of several products which provide the seal between exterior joinery and the structural envelope.

    In new buildings, this is a joint of ±2cm, but SWS can, of course, also be used for renovation of all sorts of exterior joinery: aluminium, wood and PVC. SWS also offers solutions for passive houses and timber framed houses.

    SWS has been officially tested in conjunction with various parameters and in various setups. When properly installed, SWS offers:

    • Airtight

    • Lasting Thermal and Acoustic Insulation

    • Weather Resistance

    Duravalve™:

    This product is supplied in Gun Grade cans with DuraValve™.

    DuraValve™ is a unique valve system that improves the yield and performance of Soudafoam products over much longer time periods than standard valves.

    DuraValve™ puts an end to commonly known issues such as poor yield and non-extrusion of PU Foams and is a standard for most gun applied Soudafoam Products.

    Benefits:

    • 3 times more flexible then standard PU Expanding foam

    • Airtight

    • Water Vapour Open

    • Excellent stability (no shrinkage or postexpansion)

    • High filling capacity

    • Good adhesion on all surfaces (except PE, PP and PTFE).

    • High insulation value, thermal and acoustic

    • Very good bonding properties.

    • Very precise to dose.

    • Low expansion

    • Elastic and compressible.

    • Freon free (not harmless to ozone layer and greenhouse effect)

    • Fast curing

    • Can be used at temperatures between -10°C to +30°C

    Properties:

    • Product Basis: Polyurethane Foam Filler

    • Linear Yield FEICA TM1002 (750ml Gun Grade Cannister): 22 Metres

    • Acoustic Rating ISO 717-1: 60 dB

    • Thermal Conductivity DIN 52612: 34.5mW/mK

    • Fire Class (DIN4102): B2 Fire Rated

    • Application Temperatures: -10°C to +30°C

    Standards & Certificates:

    • Baustoffklasse B2 (DIN 4102-1) - Prüfzeugnis P-SAC 02/III-164 (MFPA Leipzig).

    • Acoustical insulation (EN ISO 717-1) - PB 16733428 (IFT Rosenheim).

    • Thermal conductivity (DIN 52612) - PB 070598.1 Hu (MPA Bau Hannover).

    • Air permeability (DIN 18452) - PB 105334285 (IFT Rosenheim).

    • Water vapour permeability (DIN EN ISO 12572) - PB 50933428 (IFT Rosenheim).

    Application

    Typical Applications:

    • All foam applications in static and not static joints.

    • Installing of window and door frames.

    • Recommended for all A, A+ and A++ Rated windows and doors

    • Filling of cavities.

    • Sealing of all openings in roof constructions.

    • Apply of a sound absorbing layer.

    • Improving thermal isolation in cooling systems.

    Preparation:

    Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

    Moisten surfaces with a water sprayer prior to application.

    For non-conventional substrates a preliminary adhesion test is recommended.

    Application Method:

    Fill holes and cavities approximately ¾ full as the foam will expand.

    Repeat shaking regularly during application.

    If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

    Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

    Health & Safety Recommendations:

    Take the usual labour hygiene into account.

    Always wear gloves and goggles during application. See our Safety & PPE Products.

    Consult label and material safety data sheet for more information.

    Data Sheets

    Technical Data Sheet

    Safety Data Sheet

    £6.95 ex. VAT | £8.34 inc. VAT

    Soudafoam FR - Fire Rated Expanding Foam
    Quick Look

    Soudafoam FR - Fire Rated Expanding Foam

    £7.50 ex. VAT | £9.00 inc. VAT

    Soudafoam FR - Fire Rated Expanding Foam

    Soudafoam FR - Fire Rated Expanding Foam

    Soudal | Fire Rated Expanding Foam

    Soudafoam FR is a Fire Rated, rapid curing, one component polyurethane expanding foam filler which has a fire rating of up to 240 minutes - BS476(20) 4 Hour Fire Rating Warrington depending on configuration.

    Soudafoam FR Fire rated expanding foam has excellent thermal and acoustic properties, it expands up to 35-40 times its initial volume and has excellent primerless adhesion on most construction materials.

    Soudafoam FR Fire Rated Expanding Foam is Pink in colour, supplied in a 750ml Cannister.

    Product Features

    Benefits:

    • Fire Retardant up to 240 minutes.

    • Efficient seal against smoke and gas.

    • Excellent adhesion on most substrates (exempt Teflon, PE and PP).

    • High thermal and acoustical insulation.

    • High bonding strength.

    • Very good filling characteristics.

    • Excellent stability: no shrink or post expansion.

    • Can be painted after full cure.

    Properties:

    • Product Basis: Polyurethane Foam Filler

    • Box Yield FEICA TM1003 (750ml Cannister): 43 Litres

    • Joint Yield FEICA TM1002 (750ml Cannister): 24 Metres

    • Acoustic Rating ISO 717-1: 62 dB

    • Application Temperatures: +5°C to +40°C

    Standards:

    • Test Report 9297 - University of Ghent Standard NBN 713.020

    • Test Report 13492B - Warrington Fire Ghent: Classification report according to EN 13501-2

    • BS476 : Part 20 - Warrington Fire Research Report

    • ITB NP-0249.1/2009

    • ITB NP-0249.2/2009

    • ETA - 13/0280

    • IFT 13-002455-PR02

    Application

    Typical Applications:

    • Fire Retardant installation of window and door frames.

    • Fire and smoke retardant sealing of connections between partition walls, ceilings and floors.

    • Filling of cavities.

    • Fire Retardant sealing of all openings in roof constructions.

    • Fire Retardant sealing of cable- and pipe penetrations.

    • Fire Retardant creation of a sound-proof screen.

    • Fire Retardant bonding of insulation materials.

    • Fire Retardant application of sound-deadening layers.

    • Improving thermal insulation in cold store areas.

    Preparation:

    Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

    Moisten surfaces with a water sprayer prior to application.

    For non-conventional substrates a preliminary adhesion test is recommended.

    Application Method:

    Fill holes and cavities approximately ¾ full as the foam will expand.

    Repeat shaking regularly during application.

    If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

    Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

    Health & Safety Recommendations:

    Take the usual labour hygiene into account.

    Always wear gloves and goggles during application. See our Safety & PPE Products.

    Consult label and material safety data sheet for more information.

    Data Sheets

    Technical Data Sheet

    Declaration of Performance (DoP)

    Safety Data Sheet

    £7.50 ex. VAT | £9.00 inc. VAT

    Soudal B2 Fire Class Expanding Foam
    Quick Look

    Soudal B2 Fire Class Expanding Foam

    £4.75 ex. VAT | £5.70 inc. VAT

    Soudal B2 Fire Class Expanding Foam

    Soudal B2 Fire Class Expanding Foam

    Soudal | Expanding Foam

    Soudal B2 Fire Class Expanding Foam is a Easy to use, one component, Polyurethane B2 Fire Rated Expanding Foam Filler.

    Soudal B2 Fire Class Expanding Foam is rapid curing with excellent thermal and acoustic insulation properties. Expands 30 to 40 times it's initial volume.

    Soudal B2 Fire Class Expanding Foam has primerless adhesion on most construction materials and is used specifically where a DIN 4102 B2 Fire Class is required.

    Product Features

    Benefits:

    • B2 Fire Class

    • Excellent stability (no shrinkage or post expansion)

    • High filling capacity

    • Good adhesion on all surfaces (except PE, PP and PTFE).

    • High insulation value, thermal and acoustic

    • Very good bonding properties.

    Properties:

    • Product Basis: Polyurethane Foam Filler

    • Box Yield FEICA TM1003 (750ml Cannister): Approx 31 Litres

    • Joint Yield FEICA TM1002 (750ml Cannister): Approx 22.5 Metres

    • Acoustic Rating ISO 717-1: 58 dB

    • Thermal Conductivity DIN 52612: 35mW/mK

    • Fire Class (DIN4102): B2 Fire Rated

    • Application Temperatures: +5°C to +30°C

    Standards & Certificates:

    • Baustoffklasse B2 (DIN 4102-1) - Prüfzeugnis P-SAC 02/III-598 (MFPA Leipzig).
    Application

    Typical Applications:

    • Installing of window and door frames

    • Filling of cavities

    • Sealing of all openings in roof constructions

    • Creation of a soundproof screen

    • Mounting and sealing of window and door frames

    • Connecting of insulation materials and roof constructions

    • Application of a soundproofing layer on motors

    • Improving thermal isolation in cooling systems

    Preparation:

    Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.

    Moisten surfaces with a water sprayer prior to application.

    For non-conventional substrates a preliminary adhesion test is recommended.

    Application Method:

    Fill holes and cavities approximately ¾ full as the foam will expand.

    Repeat shaking regularly during application.

    If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.

    Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.

    Health & Safety Recommendations:

    Take the usual labour hygiene into account.

    Always wear gloves and goggles during application. See our Safety & PPE Products.

    Consult label and material safety data sheet for more information.

    Data Sheets

    Technical Data Sheet

    Safety Data Sheet

    £4.75 ex. VAT | £5.70 inc. VAT

    Soudabond Easy - PU Adhesive Foam
    Quick Look

    Soudabond Easy - PU Adhesive Foam

    £6.95 ex. VAT | £8.34 inc. VAT

    Soudabond Easy - PU Adhesive Foam

    Soudabond Easy - PU Adhesive Foam

    Soudal | PU Adhesive Foam

    Soudal Soudabond Easy is a Fast Curing, Ready-to-use, self-expanding polyurethane adhesive for clean, efficient and economical permanent bonding of insulation panels, plasterboard and many other building and construction materials.

    Benefits
    • Cuts working time by up to 30%.

    • Excellent initial bond, even at low temperatures.

    • Economical in use due to precise application.

    • One can of 'Gun Grade' covers up to 14m² of insulation. 'Hand Held' and 'Genius Gun®' Applications cover up to 12m²

    • Suitable for vertical applications.

    • Can be applied at temperatures between -5°C and +35°C.

    • Thermal conductivity 0.035 W/m.K enhances performance of insulation panels when filling gaps.

    • Remains flexible, does not become brittle.

    • Levels uneven surfaces.

    • Limited post expansion for fast and precise installation of insulation panels and plasterboard.

    • Substantial space and weight savings compared to conventional PU roof adhesives, bonding mortars, etc.

    • Fast curing, work can continue about 1 hour after application.

    • Solvent-Free.

    • Resistant to a variety of solvents, paints and chemicals.

    • Does not age or rot, mould and mildew resistant, but not UV resistant.

    • Water resistant (not watertight).

    • Building material class B2 according to DIN 4102, Part 1.

    Product Uses

    Typical Applications:

    • Clean, efficient and economical permanent bonding of insulation panels.

    • Suitable for Bonding Polystyrene (EPS + XPS), polyurethane (PUR/PIR) and phenol resin foam based insulation panels for flat roofs, perimeters, facades, insulation/drain elements, cellar ceilings, internal insulation, etc.

    • Suitable for Bonding Gypsum Plasterboard / Gypsum Fiberboard in Dry Lining applications.

    • Suitable for Bonding non-load Bearing Walls; e.g. Partition Walls, Screen Walls, Cellar Bars, Stone Shelves, etc., of Concrete Precision Blocks (Aerated Concrete, Sand-lime Brick, Gypsum,...).

    • Fills cavities between individual thermal insulation panels.

    Substrates:

    All usual substrates such as concrete, masonry, stone, plaster, wood, cold bituminous thick coatings, sand or slate surfaced bituminous sheeting, polystyrene, polyurethane and phenol resin foam, corrosion protected steel sheeting, fibre cement, gas concrete, particle board, plasterboard, gypsum fiberboard, fibre cement, hard PVC and emulsion paints.

    Adhesive surfaces must be stable, clean, without bubbles and free of separating agents such as talcum, grease, oils, etc. Suitable on moist, but not wet (water film, standing water) substrates. Any cement slurries and sinter layers on mineral substrates must be removed mechanically. Bubbles in bituminous sheeting must be removed. To ensure perfect adhesion, the bituminous sheeting should have a fully covered surface.

    Does not adhere to PE, PP. PTFE and silicone. All substrates should be tested for suitability with regard to adhesion and compatibility.

    Videos:

    Soudabond Easy Tutorial:

    How to bond Cellular Concrete with Soudabond Easy:

    Application

    General - Gun Grade Application:

    Prior to using the product, cover all adjacent areas for protection against soiling.

    In windy conditions, precautions must be taken to ensure that Soudabond Easy cannot contaminate components, objects or persons in the vicinity.

    Good ventilation must be ensured for indoor use. Wear protective goggles and gloves.

    Tightly screw the can to the thread in the gun and shake the gun about 20 times downwards so that the contents are mixed well to ensure an optimum adhesive quality and high yield.

    After extended periods of non-use, the Applicator gun must be shaken again to obtain the required adhesive quality! With the adjusting screw on the gun, adjust the adhesive bead to the required diameter. (The emptier the can, the more the adjusting screw needs to be opened). The gun must be held vertical during application.

    A distance of 1 to 2 cm must be maintained between the gun nozzle and insulation panel/substrate while spraying. Apply pressure to the insulation panel within about 8 minutes (20°C - 65% R.H. – this time is shorter at higher temperature / humidity and longer at lower temperature / humidity).

    Do not tap or remove and reapply panels as this will damage the adhesive structure and reduce the adhesive strength substantially.

    At high temperatures and low humidity in particular, curing can be accelerated by lightly spraying the adhesive bead with water.

    General - Hand Held Application:

    Follow the same preparation measures as above. Screw the straw to
    valve and shake the can about 20 times downwards so that the contents are mixed well to ensure an optimum adhesive quality and high yield.

    After extended periods of non-use, the can must be shaken again to obtain the required adhesive quality! The can must be held vertical during application.

    A distance of 1 to 2 cm must be maintained between the straw nozzle and insulation panel / substrate while spraying.

    Apply product as mentioned above.

    Bonding Flat Roof Insulation Materials:

    Apply Soudabond Easy directly to the substrate. Pressure should be applied to the insulation panels for optimal contact and maintained using suitable weights for at least 15 minutes to prevent lifting and slipping through wind suction. The panels must not be subjected to traffic for about 2 hours.

    Consumption: At least three uniform adhesive beads with a minimum diameter of 30 mm are required per m² adhesive surface. The number of adhesive strips, according to DIN 1055, part 4, depend on the region, roof area, structure height, corner and edge areas as well as the materials to be bonded.

    The amount of adhesive to be applied depends on the wind load and must be increased in corner and edge areas.

    Perimeter Insulation:

    Soudabond Easy facilitates the installation of insulation panels in perimeter areas according to DIN 4108-2. (Not suitable for pressing water!).

    Spray Soudabond Easy from bottom to top with a bead spacing of about 25 cm (minimum three beads per continuous panel or minimum two beads for short panels!) on to the insulation panel or cellar wall.

    Press the insulation panel lightly against the cellar wall. Work from bottom to top without gap.

    The insulation panels must be bonded staggered in corners of buildings. The installed insulation panels can be readjusted with a long spirit level to correct any post expansion of the adhesive within 8 minutes.

    The insulation achieves its final strength through the pressure of the filled soil, gravel or similar. Filling must take place within 14 days after bonding.

    In all other cases, Soudabond Easy is ideal for bonding insulation panels to interior walls and exterior facades!

    The can must be held vertical during application. Apply a circular bead of Soudabond Easy to the insulation panel with enclosed M/W to cover an adhesive area of minimum 40% with pressure applied.

    Wait at least 2 to maximum 8 minutes (20°C / 65% R.H. – this time is shorter at higher temperature / humidity and longer at lower temperature/humidity) and subsequently press the insulation panel against the wall.

    Work from bottom to top without gap. Insulation panels must be bonded staggered in outer corners of buildings. Installed insulation panels can be adjusted with a long spirit level after 10 to 15 minutes to correct any post expansion of the adhesive.

    It is recommended to fix the last installed insulation panel during breaks

    Cellar Ceiling Insulation:

    For working overhead, suitable protective goggles must be worn!

    Soudabond Easy has a very high initial bonding strength and is therefore ideal for permanent bonding of insulation panels to cellar ceilings, garage ceilings or other overhead areas, also without additional mechanical fastening.

    Suitable are all standard insulation panels of polystyrene (EPS and XPS) and PUR/PIR measuring 500 x 500 mm with a maximum thickness of 100mm and a maximum weight of 400g.

    Larger and heavier insulation panels and/or additional surfaces should be fixed mechanically within 15 minutes. This is easily done using ceiling supports for example.

    Prior to application, the substrate stability must be verified. This can also take place with a sealing tape test.

    In this test, sealing tape is applied to the substrate and quickly pulled off again. If old paint or plaster adheres to the adhesive tape, this means that the substrate does not have the necessary stability and must be reinforced or removed. With chalking and highly absorbent substrates, the substrate adhesion can be improved with a deep solvent primer. Protruding concrete burr must be removed mechanically.

    At least one circular and one angular adhesive foam bead with a minimum diameter of 30mm (about 40g per panel) must be applied to each 500mm x 500mm panel.

    Do not apply the adhesive too close to the outer edges to avoid the excess going over the edges when pressure is applied to the insulation panel.

    Before bonding the insulation panel to the ceiling, Soudabond Easy must be allowed to stand for 3 to maximum 6 minutes to achieve the required initial strength.

    The insulation panel can subsequently be bonded to the ceiling. The panel must be placed carefully in the required position and pressure applied without tapping (damages the adhesive structure).

    The next insulation panel must be bonded 5 minutes after the previously bonded panel so that it remains in place when the next panel is bonded.

    Insulation panels must be additionally fixed in the centre with a suitable insulation anchor under unfavourable bonding conditions.

    Interior Insulation / Dry Lining:

    Prior to application, the substrate stability must be verified. This can also take place with a sealing tape test. In this test, sealing tape is applied to the substrate and quickly pulled off again. If old paint or plaster adheres to the adhesive tape, this means that the substrate does not have the necessary stability and must be reinforced or removed.

    With chalking and highly absorbent substrates, the substrate adhesion can be improved with a deep solvent primer.

    Remove protruding concrete burr or excess plaster. Soudabond Easy levels uneven surfaces up to 30mm.

    Interior Insulation Panels:

    Apply Soudabond Easy about 2cm away from the edge of the panel as a 30mm circular bead and to the panel surface in lines or a W-shape. It must be ensured that the adhesive contact area is about 40% after applying pressure.

    The adhesive must always be applied circular also for panel cut-outs, penetrations, etc., to prevent rear circulation of the interior insulation.

    After applying Soudabond Easy, depending on the climatic conditions, allow to flash off for about 3-6 minutes. This ensures that an optimal adhesive strength is achieved with reduced post expansion. Subsequently place the insulation panel on wedges, align and apply pressure from bottom to top. Do not tap or remove the panels as this can reduce the adhesive strength substantially.

    Apply new adhesive if necessary. After about 6 to 10 minutes, check for correct seating, readjust with a spirit level/level. Edges of walls, ceilings and floors, openings and penetrations must be filled out completely with Soudabond Easy air-tight and sound insulated. Work can be continued after minimum 1 hour.

    Soudabond Easy can also be used for mounting electrical installation boxes.

    Plasterboard:

    In contrast to interior installation, three vertical adhesive beads are sufficient for the installation of plasterboard wider than 50cm. For panel widths below 50cm, a minimum of two adhesive beads must be applied.

    Concrete Precision Block Bonding:

    Soudabond Easy must not be used for components requiring approval, e.g. supporting walls and walls relevant for safety!  Good ventilation must be ensured for indoor use.

    Clean the adhesive surfaces, remove lose particles and moisten. Apply two Soudabond Easy adhesive beads with a diameter of about 30mm to the substrate and subsequently to all further concrete precision blocks.

    The adhesive beads must be applied about 50mm away from the stone edge parallel on horizontal and vertical joints.

    Position / join and align bricks within minimum 2 to maximum 8 minutes (20°C/65% R.H. – this time is shorter at higher temperature/humidity and longer at lower temperature / humidity).

    If once joined bricks are removed, new adhesive beads must be applied. Allow excess adhesive to cure and subsequently remove, e.g. with a spatula.

    Depending on the ambient temperature, work can be continued after minimum 60 minutes. The adhesive achieves full strength after minimum 12 hours.

    Other Applications:

    Due to its excellent adhesive properties, reduced foaming and fast final strength, Soudabond Easy is suitable for numerous bonding applications.

    Soudabond Easy is ideal for the installation of insulation panels in building and construction. Installation of loft insulation reveals and claddings as well as bonding of wall edging strips are just a few examples.

    General Note:

    Do not load/subject the bond to traffic within the curing time of about 2 hours! All open joints within the insulation can be filled out with Soudabond Easy.

    Trim protruding, fully cured adhesive with a sharp knife.

    Soudabond Easy can be painted or plastered after curing.

    Data Sheets

    Soudabond Easy Application Manual

    Technical Data Sheet - Gun Grade

    Technical Data Sheet - Hand Held

    Technical Data Sheet - Genius Gun®

    Safety Data Sheet

    £6.95 ex. VAT | £8.34 inc. VAT

    Soudafoam Gun & Foam Cleaner - 500ml Tin
    Quick Look

    Soudafoam Gun & Foam Cleaner

    £3.95 ex. VAT | £4.74 inc. VAT

    Soudafoam Gun & Foam Cleaner

    Soudafoam Gun & Foam Cleaner

    Soudal | Expanding Foam

    Soudafoam Gun & Foam Cleaner is an aerosol applied, solvent based Polyurethane Foam Cleaner used mainly for the cleaning of PU Foam Applicator Guns.

    Gun applied PU Foam valves and uncured PU Foam can also be quickly and easily removed with the attachable spray nozzle.

    Properties
    • Used in conjunction with Foam Applicators as cleaning fluid

    • Contains solvents

    • Attachable spray nozzle allows for cleaning uncured spilt Polyurethane Foam.

    Application

    Typical Applications:

    • For the safe and quick removal of uncured Polyurethane Foam from Applicator Guns and surfaces

    Application Method:

    To use as an Aerosol Cleaner:

    Attach the Soudafoam red spray nozzle onto the valve and spray the cleaner towards the uncured foam. The foam will dissolve and can be wiped away using a cloth.

    Please perform a compatibility test with all substrates as the cleaner is solvent based and may affect some materials adversely.

    To Clean Applicator Guns:

    Remove the Soudafoam Expanding Foam cannister from the applicator by screwing anti-clockwise.

    Use the cleaner as an aerosol spray to clean the exterior of the gun, the valve and the tip. Pull the trigger on the gun to de-pressurise the gun (please note, some foam may be extruded).

    Spray the cleaner onto the adaptor ring to clean off the remainder of the uncured foam. Remove the red spray nozzle and screw the cleaner onto the gun turning clockwise until tight. Turn upside down and pull the trigger of the gun for a few seconds, let the cleaner activate inside the gun for a few minutes, then pull the trigger again for a few seconds.

    Repeat the spraying and activating periods until only the clear solvent cleaner is visibly dispensed.

    Health & Safety Recommendations:

    Take the usual labour hygiene into account.

    Apply only in well ventilated areas. Always wear gloves and goggles during application. See our Safety & PPE Products.

    Consult label and material safety data sheet for more information.

    Data Sheets

    Technical Data Sheet

    Safety Data Sheet

    £3.95 ex. VAT | £4.74 inc. VAT

    Soudal 'Design' PU Foam Gun
    Quick Look

    Soudal 'Design' PU Foam Gun

    £23.95 ex. VAT | £28.74 inc. VAT

    Soudal 'Design' PU Foam Gun

    Soudal 'Design' PU Foam Gun

    Soudal | Expanding Foam

    A Premium Quality Heavy Duty Professional Grade Metal Applicator Gun for use with Gun Foam Cannisters.

    £23.95 ex. VAT | £28.74 inc. VAT

    Bond-It Professional PU Foam Gun
    Quick Look

    Bond-It Professional PU Foam Gun

    £9.50 ex. VAT | £11.40 inc. VAT

    Bond-It Professional PU Foam Gun

    Bond-It Professional PU Foam Gun

    Bond-It | Expanding Foam Fillers

    Foam PU Foam Applicator Products

    A High Quality Metal Gun Applicator Gun for use with Gun Foam Cannisters.

    £9.50 ex. VAT | £11.40 inc. VAT

    • 1
    • 2