Fire Rated Expanding Foam and Sealant, and High Temperature Sealants within our range include the following products:
Soudafoam FR; a Premium FIRE RATED Polyurethane Expanding Foam with a fire resistance of up to 4 Hours in certain configurations.
Fire Silicone B1 FR: Fire Silicone B1 FR is a FIRE RATED, Neutral Cure Silicone Sealant with a fire rating of up to 4 hours in certain joint configurations.
Firecryl FR; a Premium FIRE RATED intumescent acrylic sealant, with a fire resistance of up to 4 Hours in certain configurations.
Silirub HT-A°; a Premium HIGH TEMPERATURE resistant acetoxy silicone sealant for use in ovens, pipework, gaskets etc...
Firecement HT°; a Premium HIGH TEMPERATURE resistant Fire Cement which withstands temperatures of up to +1500°C.
The 'Fire Resistance' rating indicates the duration in minutes for which a passive fire protection system can withstand a fire resistance test. Soudal 'FR' Products have been independently tested against British and European norms such as EN 1366-4 and BS476 Part 20, and they have been shown to have fire resistance ratings of up to 4 hours.
Soudal | Fire Rated Expanding Foam
Soudafoam FR is a Fire Rated, rapid curing, one component polyurethane expanding foam filler which has a fire rating of up to 240 minutes - BS476(20) 4 Hour Fire Rating Warrington depending on configuration.
Soudafoam FR Fire rated expanding foam has excellent thermal and acoustic properties, it expands up to 35-40 times its initial volume and has excellent primerless adhesion on most construction materials.
Soudafoam FR Fire Rated Expanding Foam is Pink in colour, supplied in a 750ml Cannister.
Fire Retardant up to 240 minutes.
Efficient seal against smoke and gas.
Excellent adhesion on most substrates (exempt Teflon, PE and PP).
High thermal and acoustical insulation.
High bonding strength.
Very good filling characteristics.
Excellent stability: no shrink or post expansion.
Can be painted after full cure.
Product Basis: Polyurethane Foam Filler
Box Yield FEICA TM1003 (750ml Cannister): 43 Litres
Joint Yield FEICA TM1002 (750ml Cannister): 24 Metres
Acoustic Rating ISO 717-1: 62 dB
Application Temperatures: +5°C to +40°C
Test Report 9297 - University of Ghent Standard NBN 713.020
Test Report 13492B - Warrington Fire Ghent: Classification report according to EN 13501-2
BS476 : Part 20 - Warrington Fire Research Report
ITB NP-0249.1/2009
ITB NP-0249.2/2009
ETA - 13/0280
IFT 13-002455-PR02
Fire Retardant installation of window and door frames.
Fire and smoke retardant sealing of connections between partition walls, ceilings and floors.
Filling of cavities.
Fire Retardant sealing of all openings in roof constructions.
Fire Retardant sealing of cable- and pipe penetrations.
Fire Retardant creation of a sound-proof screen.
Fire Retardant bonding of insulation materials.
Fire Retardant application of sound-deadening layers.
Improving thermal insulation in cold store areas.
Shake the aerosol can for at least 20 seconds. Attach the can onto the Applicator Gun. Surface should be free from grease and dust.
Moisten surfaces with a water sprayer prior to application.
For non-conventional substrates a preliminary adhesion test is recommended.
Fill holes and cavities approximately ¾ full as the foam will expand.
Repeat shaking regularly during application.
If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam Cleaner or acetone.
Cured foam can only be removed mechanically or with Cured PU Foam Remover. Never burn away cured foam.
Take the usual labour hygiene into account.
Always wear gloves and goggles during application. See our Safety & PPE Products.
Consult label and material safety data sheet for more information.
Soudal | Fire Rated Silicone Sealant
**LIMITED STOCKS AVAILABLE**
Soudal Fire Silicone B1 FR is a FIRE RATED, Neutral Cure Silicone Sealant.
Soudal Fire Silicone B1 FR is Solvent Free and Virtually Odourless with Primerless adhesion on all common construction materials (i.e glass, plastics, masonry substrates, metals and wood). High movement capability. Resistant to UV, rain, ozone and many chemicals.
Soudal Fire Silicone B1 FR Conforms to all international standards including CE Marking.
Soudal Fire Silicone B1 FR Conforms to the DIN4102 B1 standard for fire retardancy and has a fire rating of up to 4 hours in certain joint configurations (EN 1366 Part 4 NN713.020 – BS 476/20).
Very easy to apply
Colourfast and UV Resistant
Remains permanently elastic after full cure
Very good adhesion on most surfaces
Weatherproof
EN13501-1 - Reaction to Fire, Class E
ETAG-026 - Part 1, Part 3
EN1366-4 - Fire Resistance, up to 4 Hours depending on joint configuration.
For use in External and Internal Passive Fire Systems as an Elastic Joint Sealant.
Installation of Fire Retardant Window and Door Frames.
For use in Fire Retardant Expansion and Connection Joints, and Penetration Seals.
Surfaces should be clean, dry, free of dust and grease.
Porous substrates should be primed with Soudal Primer 150. Soudal Surface Activator will improve adhesion on smooth surfaces.
We recommend a preliminary compatibility test.
Application Method: With a manual or pneumatic caulking gun. Finish with spatula or filling knife.
Cleaning: Clean uncured product with a white spirit immediately after use.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
Minimum Width for Joints: 5mm
Maximum Width for Joints: 30mm
Recommendation Sealing Jobs: Joint Width = 2 x Joint Depth.
Test Report 9297: University of Ghent
NBN 713.020: EN 1366-4
BS 476:Part 20: Warrington Fire Research Report
DIN4102-B1: Institut für Bautechnik, Berlin
TNO-rapport 2000-CVB-R00703
TI = Thermal Insulation; the time during which the temperature on the unexposed side of the wall does not rise by more than 180°C
FR = Flame Resistance; the time during which the joints stops flames from penetrating the wall
Fire Rating: Draft European Commission Decision RG N170 REV.1
Soudal | Intumescent Acrylic Sealant
Soudal Firecryl FR is a Fire Rated Intumescent Acrylic Sealant and Filler which is totally free of solvents, silicones and isocyanates.
Soudal Firecryl FR is colourfast and waterproof after curing, it can also be painted over once cured. Primerless adhesion on most surface.
Soudal Firecryl FR resist the passage of fire and smoke and is fire resistant up to 4 hours with PE backer rod (EN 1366 Part 4-NBN713.020- BS 476/20).
Soudal Firecryl FR is intumescent in contact with fire, and swells when exposed to temperatures in excess of 120°C.
Fire Rated Acrylic Polymer Sealant
Resist the passage of fire and smoke
Intumescent in contact with fire
Swells when exposed to temperatures in excess of 120°C
Stays elastic and can be painted over after curing
Colourfast and waterproof after curing
Very good adhesion on many porous surfaces
EN1366-4 - Fire Resistance, up to 4 hours depending on joint configuration
BS476 Part 20 - Fire Resistance, up to 4 hours depending on joint configuration
EN13501-1 Reaction to Fire, Class E
Interior Fire Resistant Applications. For exterior applications see Fire Silicone B1 FR.
Fire Resistant sealing compound for cracks in concrete and plaster
Fire Resistant connection joints in the building industry
Fire Resistant joints with movements up to 10%.
For use on most porous surfaces.
Prepare very porous surfaces such as plasterboard, cellular concrete etc. with a suitable primer or with diluted Firecryl FR (1 part Firecryl FR and 2 parts water).
Not suitable for use on natural stone, bitumen, glass and metal.
We recommend a preliminary adhesion test on every surface.
Cleaning: Clean uncured product with a water immediately after use.
Minimum Width for Joints: 5 mm
Maximum Width for Joints: 20 mm
Minimum Depth for Joints: 5 mm
Recommendation Sealing Jobs: Joint Width = Joint Depth. Use PE backer rods in case of large joint dimensions to avoid three-sided adhesion.
Do not use in applications where continuous water immersion is possible.
Do not apply when rain or frost is imminent
Firecryl FR can be painted over with most paints.
The paint should be sufficiently elastic to be applied on a plasto-elastic sealant. A preliminary test is recommended.
Test Report 9297 - University of Ghent to
NBN 713.020 - EN 1366-4
BS 476:Part 20 - Warrington Fire Research Report
Soudal | High Temperature Silicone Sealant
Soudal Silirub ® HT-A° is a High Temperature Resistant Acetoxy Silicone Sealant.
Soudal Silirub ® HT-A° can withstand high temperatures up to 285°C, it's highly flexible and is weatherproof.
Soudal Silirub ® HT-A° has primerless adhesion on many common construction materials including glass, ceramic, porcelain, metals and wood.
Soudal Silirub ® HT-A° is resistant to UV, rain, snow, ozone and many chemicals and has high movement capability.
Permanent elastic after curing
High Modulus
High Temperature resistance up to 285°C
Excellent adhesion on metals, glass and glazed substrates
For the sealing of elastic joints which require a high temperature resistance (i.e gaskets, hot water installations, pipework, ovens, furnaces and chimney flues).
Suitable for external and internal applications.
Porous surfaces in water loaded applications should be primed with Soudal Primer 150. No primer needed for non-porous substrates.
Not suitable for use on concrete or PVC.
There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.
Application Method: With a manual or pneumatic caulking gun.
Cleaning: Clean with a Surface Cleaner immediately after use.
Maximum Width for Joints: 30 mm
Do not use on natural stones like marble, granite etc. as it may cause staining.
Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.
We strongly recommend not to apply the product in full sunlight as it will dry very fast.
Do not use in applications where continuous water immersion is possible
Soudal | High Temperature Cement Based Sealant
Soudal Firecement HT° is a High Temperature Resistant Fire Cement Sealant which cures to form a hard setting seal and withstands temperatures of up to 1500°C.
Heat resistant up to 1500°C
Does not contain asbestos or other harmful components
Hard setting
Does not crumble or crack after cure
Fire Rating of 120 minutes (Test Report 7830).
Suitable for Internal Use
Sealing of joints and openings at furnaces, heating systems, central heatings, barbecues, etc.
Heat retardant sealing at existing constructions
For use on brickwork, concrete and metals.
Slight moistening of the surface will increase adhesive strength
Application Method: With a manual or pneumatic caulking gun, spatula or a trowel.
Maximum Width for Joints: 15 mm
A slight heating up of the installation during 12 hours after application of Firecement HT° will prevent the forming of bubbles and improve the sealant structure.
Do not apply in situations where constant water immersion is possible
Test Report 7830 – University of Ghent to
NBN 713.020
BS 476:Part 20 – Warrington Fire Research Report C81770
We've added to your cart
01355 222 777