Soudal | SMX® Hybrid Polymer
The Soudal Fix All Crystal Clear, 6-Pack Promotion.
Soudal Fix All Crystal Clear is a Premium Quality Crystal Clear Sealant, Adhesive and Filler based on SMX® Hybrid Polymer. Soudal Fix All Crystal Clear may be applied onto wet and damp surfaces, and is suitable for use internally and externally.
Supplied in packs of 6 x 290ml Cartridges, in Crystal Clear colour.
Each 6-Pack is supplied with an A6 Scratch Card, giving you the chance to win a Ford Ranger Wildtrak (Reg 2019), courtesy of Soudal. Full details shown in 'Description' Tab below.
This Promo also applies to Fix All High Tack White 6-Packs.
We're giving customers the chance to win a Ford Ranger Double-Cab Wildtrak 3.2 (Reg 2019 with Road Fund License), courtesy of Soudal. Details are as follows.
Each 6-Pack will contain an A6 Scratch Card with a unique 10-Digit Code.
Scratch the panel on the reverse-side to reveal your unique Code.
Enter your details and your scratch card code before 31st March 2020.
On 31st March 2020, the winning code will be randomly drawn.
The winner will be contacted the following month.
Soudal Fix All Crystal Clear is a Super Clear multi-use Sealant, Adhesive and Filler based on SMX® Hybrid Polymer.
Soudal Fix All Crystal Clear can be applied in all weather conditions (including wet and damp surfaces), internally and externally.
Soudal Fix All Crystal Clear contains no solvents or odours and has primerless adhesion on most construction materials. Overpaintable with most paints.
Non-staining on porous natural stones. Also suitable for sanitary applications.
Crystal Clear Formulation
Excellent adhesion on nearly all surfaces, even if slightly moist.
Very good mechanical characteristics.
Impervious to mould, contains ZnP (biocide with fungicidal action).
Suitable for Sanitary Applications.
Good extrudability even at low temperatures.
Free of isocyanates, solvents, halogens and acids.
Can be painted with all water based paints and many other systems (to be tested).
Permanent elastic after curing.
All common bonding and sealing applications, both in and outdoor.
Transparent and elastic bonding in construction and building applications.
Invisible bonding of glass and other transparent materials in indoor applications.
Joints in bathrooms and kitchens.
Porous surfaces in water loaded applications should be primed with Soudal Primer 150.
Smooth surfaces should be degreased before bonding them together. We recommend a preliminary adhesion test on every surface.
While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding.
NOTE: Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Fix All Crystal is not recommended in these applications.
There is no adhesion on PE, PP, PTFE (Teflon®) and bituminous substrates. We recommend a preliminary compatibility test.
Application: With manual or pneumatic Caulking Gun.
Cleaning: With Sealant Remover immediately after use. Cured Fix-All can only be removed mechanically.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material
Minimum Width for Bonding: 1 mm
Minimum Width for Joints: 5 mm
Maximum Width for Bonding: 3 mm
Maximum Width for Joints: 10 mm
Minimum Depth for Joints: 5 mm
Fix All Crystal is paintable with water-based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.
The drying time of alkyd resin based paints may increase.
Fix All Crystal can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.
Fix All Crystal is not suitable for expansion joints.
Do not use in applications where continuous water immersion is possible.
Fix All Crystal has a good UV resistance but can discolour under extreme conditions or after very long UV exposure.
Fix All Crystal can not be used as a glazing sealant.
Not suitable for bonding aquariums.
Fix All Crystal cannot be used on natural stone. Because the adhesion surface will discolour under influence of the sealant (looks wet) and because this is visible through the crystal clear sealant it seems like staining has occurred.
The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remainings will stimulate the development of fungi.
We've added to your cart