Cavity Drain Membrane Plugs & Fixings

Platinum Chemicals offer a wide range of high quality Membrane Plugs & Fixings for use with Cavity Drain Membranes.Platinum Waterseal Brick Plugs, Newton Multi-Plugs and Newton Nu-Seal Plugs are used to fix specialist membranes to brickwork and concrete. A 10mm SDS Drill Bit is required when fixing these plugs to the membrane. The plugs should always be sealed with either the sealing washers, or in certain... Read More

Cavity Drain Membrane Plugs & Fixings

Platinum Waterseal Brick Plugs
Quick Look

Platinum Waterseal Brick Plugs

£26.00 ex. VAT | £31.20 inc. VAT

Platinum Waterseal Brick Plugs

Platinum Waterseal Brick Plugs

Platinum Building Chemicals Ltd | Waterproofing Membranes

Brick Plugs Cavity Drain Membranes Cavity Drain Plugs Membrane Plugs & Fixings Waterproof Membranes

Platinum Waterseal Brick Plugs are used in Basement Waterproofing and Damp Proofing applications to secure specialist Cavity Drain Membranes to the base material, usually brickwork & concrete.

Platinum Waterseal Brick Plugs are manufactured from glass filled polyamide which gives a high strength, corrosion resistant fixing.

The Sealing Washers are used in conjunction with Platinum Waterseal Brick Plugs to provide a watertight seal under the fixing head.

Plug Size: (W) 10mm x (L) 60mm

Washer Size: Accepts 10mm wide plug.

Application

Application requires a drilling of a 10mm diameter hole through the membrane and into the solid base material.

A central hole in the fixing will accept a woodscrew for securing timber battens for internal lining systems.

£26.00 ex. VAT | £31.20 inc. VAT

Newton® MultiPlugs
Quick Look

Newton® MultiPlugs

£47.50 ex. VAT | £57.00 inc. VAT

Newton® MultiPlugs

Newton® MultiPlugs

John Newton & Co. Ltd | Waterproofing Membranes

Membrane Plugs & Fixings Waterproof Membranes

Newton® MultiPlugs are used for securing Newton® Cavity Drain Membranes to the wall and for providing a fixing point for 5mm screws.

Newton® MultiPlugs have been engineered to give a better fix in questionable substrate. It has the added benefit of having a rubber sealing grommet supplied with the plug.

In very poor substrate, Newton® MultiPlug Pins can be inserted into the plug that expands its outer circumference by nearly 2mm to tighten the plug into the substrate.

The MultiPlug is pre-drilled to accept a size 10 (5mm) self-tapping screw for the fixing of battens or other dry-lining systems.

£47.50 ex. VAT | £57.00 inc. VAT

Newton® MultiPlug Pins
Quick Look

Newton® MultiPlug Pins

£16.00 ex. VAT | £19.20 inc. VAT

Newton® MultiPlug Pins

Newton® MultiPlug Pins

John Newton & Co. Ltd | Waterproofing Membranes

Membrane Plugs & Fixings MultiPlug Pins Newton MultiPlug Waterproof Membranes

Newton® Multi-Plug Pins are inserted into Newton® MultiPlugs to expand its outer circumference by nearly 2mm to tighten the plug into poorer substrates.

£16.00 ex. VAT | £19.20 inc. VAT

Newton® Nu-Seal Plugs
Quick Look

Newton® Nu-Seal Plugs

£29.50 ex. VAT | £35.40 inc. VAT

Newton® Nu-Seal Plugs

Newton® Nu-Seal Plugs

John Newton & Co. Ltd | Waterproofing Membranes

Membrane Plugs & Fixings Waterproof Membranes

Newton® Nu-Seal Plugs are used to secure Cavity Drain Membranes to building substrates and to fix battens or tracking systems.

Slightly longer than the MultiPlug, supplied without a sealing washer and used with a bead of Waterseal Rope as the seal for fixing the membrane to vaulted ceilings and sloping soffits.

£29.50 ex. VAT | £35.40 inc. VAT

Platinum 'Mesh-Fix' Plaster Plugs
Quick Look

Platinum 'Mesh-Fix' Plaster Plugs

£28.00 ex. VAT | £33.60 inc. VAT

Platinum 'Mesh-Fix' Plaster Plugs

Platinum 'Mesh-Fix' Plaster Plugs

Platinum Building Chemicals Ltd | Damp Proofing

In above ground installations, Platinum 'Mesh-Fix' Plaster Plugs can be used internally and externally to secure Damp Proofing Meshed Membranes.

Application

Use an 8mm SDS Drill Bit to drill through membrane and substrate prior to hammering home fixing plug.

Newton® 801-M Mastic Sealant should be injected into the drilled hole before fixing the plug into the membrane, it serves to stop any ‘bridge’ happening between the damp or stained surface and the new surface and is also used for sealing around protrusions.

£28.00 ex. VAT | £33.60 inc. VAT

Platinum Cob Plugs
Quick Look

Platinum Cob Plugs

£24.95 ex. VAT | £29.94 inc. VAT

Platinum Cob Plugs

Platinum Cob Plugs

Platinum Building Chemicals Ltd | Damp Proofing

Membrane Plugs & Fixings

Platinum Cob Plugs are used to secure Damp Proofing Membranes and lining boards to poor quality base material.

Brickwork and blockwork in particular can become soft and unsuitable for standard Plaster Plugs. Platinum Cob Plugs have an expansion pin which provides a secure fixing to poor quality base material.

Platinum Cob Plug are supplied in 60mm and 90mm lengths.

Application

When fixing membrane to the wall using Platinum Cob Plugs, use a 10mm Drill Bit and drill to a depth of 5mm deeper than the plugs length (i.e if using using a 60mm Cob Plug, drill to a depth of 65mm. This will allow sufficient space for the fixing to expand in the substrate).

Insert the Cob Plug into the drilled hole and hit the central nail into the plug. This will make the Cob Plug expand into the substrate and create a secure fixing.

£24.95 ex. VAT | £29.94 inc. VAT

Newton® 800 Mesh Plugs
Quick Look

Newton® 800 Mesh Plugs

£26.50 ex. VAT | £31.80 inc. VAT

Newton® 800 Mesh Plugs

Newton® 800 Mesh Plugs

John Newton & Co. Ltd | Damp Proofing

Damp Proof Membrane Plugs Membrane Plugs & Fixings Newton System 800

Above ground, Newton 800 Mesh Plugs can be used internally and externally to secure meshed membranes.

Application

Use an 7mm SDS Drill Bit to drill through membrane and substrate prior to hammering home fixing plug.

Newton® Mastic Sealant should be injected into the drilled hole before fixing the plug into the membrane, it serves to stop any ‘bridge’ happening between the damp or stained surface and the new surface and is also used for sealing around protrusions.

£26.50 ex. VAT | £31.80 inc. VAT

Newton® 800 Cob Plugs
Quick Look

Newton® 800 Cob Plugs

£21.75 ex. VAT | £26.10 inc. VAT

Newton® 800 Cob Plugs

Newton® 800 Cob Plugs

John Newton & Co. Ltd | Damp Proofing

Membrane Plugs & Fixings

Newton® 800 Cob Plugs are used to secure Damp Proofing Membranes and lining boards to poor quality base material.

Brickwork and blockwork in particular can become soft and unsuitable for standard Plaster Plugs. Newton® 800 Cob Plugs have an expansion pin which provides a secure fixing to poor quality base material.

Newton® 800 Cob Plug are supplied in 90mm length. When fixing membrane to the wall using these plugs, drill to a depth of 95mm using a 10mm Drill Bit.

£21.75 ex. VAT | £26.10 inc. VAT