Ultracure™ is a unique silicone emulsion cream for injection into brickwork etc. for the control of rising dampness.
Ultracure™ can be used in all types of masonry without the use of high pressure equipment.Application
Ultracure™ is delivered by use of the Professional 1 Litre Cartridge Gun & Nozzle (when using a 1 Litre Cartridge).
Once in the substrate, the cream migrates into the masonry pores and rapidly reverts to a liquid phase.
Polysiloxanes are formed in situ and the curing of the DPC starts immediately with a final cure within 2-6 weeks depending on the wall thickness.
Ultracure™ will perform as well as any conventional solvent based injection system against rising damp.
- Fast clean Installation
- Virtually odourless, low hazard
- No electric pressure pumps required
- No pump cleaning required between jobs
- Precise, measured injection
- BBA Approved
Product Data Sheets
|Wall Thickness||4 1/2" (110mm)|
|13 1/2" (330mm)||18" (440mm)|
|Application Rate Per 10M||0.9L||1.9L||2.9L||3.9L|
|Per 1 Litre||11.25M||5.62M||2.80M||2.50M|
Technical Data Sheet Safety Data Sheet Ultracure BBA CertificateOther Information
This Product is
BBA Approved. Agrément Certificate No: 02/3961