Poduct Description
- 24 x 380ml Cartridges of Ultracure™ Damp Proofing Cream
- 3 x 9" Extension Nozzle
- 1 x Power Pro Sealant Gun
- 2 x SDS Drill Bit (12mm x 260mm)
Product Description
Ultracure™ is a unique silicone emulsion cream for injection into brickwork etc. for the control of rising dampness.
Ultracure™ can be used in all types of masonry without the use of high pressure equipment.
Application
Ultracure™ (in 380ml Cartridges) is delivered by use of a standard Sealant Gun & Extension Nozzle.
Once in the substrate, the cream migrates into the masonry pores and rapidly reverts to a liquid phase.
Polysiloxanes are formed in situ and the curing of the DPC starts immediately with a final cure within 2-6 weeks depending on the wall thickness.
Ultracure™ will perform as well as any conventional solvent based injection system against rising damp.
Advantages
- Fast clean Installation
- Virtually odourless, low hazard
- No electric pressure pumps required
- No pump cleaning required between jobs
- Precise, measured injection
- BBA Approved
Coverage Rates
Wall Thickness
| 4 1/2" (110mm)
| 9" (220mm)
| 13 1/2" (330mm)
| 18" (440mm)
|
Borehole Depth
| 100mm
| 200mm
| 310mm
| 420mm
|
Borehole Diameter
| 12mm
| 12mm
| 12mm
| 12mm
|
Application Rate Per 10M
| 0.9L
| 1.9L
| 2.9L
| 3.9L
|
Per 380ml Cartridge
| 4.5M
| 2.25M
| 1.12M
| 1M
|
Product Data Sheets
Technical Data Sheet Safety Data Sheet Ultracure BBA CertificateOther Information
This Product is
BBA Approved. Agrément Certificate No:
02/3961
