Product Description
Platinum Chemicals Tanking Slurry waterproofing system provides a solution to water leakage, ingress or seepage in concrete structures or any cementitious substrate. The formation and development of insoluble crystals into water bearing capillaries and fissures effectively blocks the further passage of water and ensures permanent water tightness for the life of the structure.
The Platinum Tanking Slurry system is designed to function against water penetration in various conditions. Platinum Tanking Slurry ,supplied as a powder and when mixed with water, is applied directly to concrete, blockwork masonry or cement renders in areas where general waterproofing is required. Platinum Tanking Slurry is used in conjunction with Platinum Water Plug for instant leak plugging.
Application
For detailed information on application and of Platinum Tanking Slurry please view our Technical Data Sheet (at bottom of page).
Advantages
- Provides excellent waterproofing properties by becoming an integral part of the structure to which it is applied
- Non toxic
- Non tainting
- Dual crystalline and surface action
- Allows the substrate to breath
- The migratory crystalline action is reactivated should future water contact occur
- Platinum Tanking Slurry becomes integral to the substrate thus eliminating potential wear, de-lamination or peeling.
Coverage Rates
It is important that no less than then minimum amount of product per square meter be applied and it is essential that two coats are used.
By Brush: 1 to 1.5 kilos per mē per coat
By Trowel: 2 to 2.5 kilos per mē per coat
By Spray: 1.5 kilos per mē per coat
N.B. In areas of excessive water pressure the amount of Platinum Tanking Slurry should be increased to a total of 6 kilos per mē.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
