Product Description
The innovative microemulsion formulation in Platinum Masonry Biocide contains the fungicide 3-Iodo-2-butyl carbamate (IPBC). The formulation provides high active loading, rapid rates of absorption combined with excellent penetration making it ideal for use in the eradication of dry rot in all types of masonry and brickwork.
Platinum Masonry Biocide concentrate is an insecticidal and fungicidal treatment based on water internal micro-emulsion technology in which all organic solvent components are removed from the formulation.
Platinum Building Chemicals formulations are all cleared under the Governments Pesticide Safety Precaution scheme and under the Control of Pesticide Regulations 1986, for use as directed.
Advantages
- Dilutes to make 25 litres of Ready-to-use Product
- Extremely stable with no phase separation
- Solvent free technology with no volatility issues
- Non-hazardous fully biodegradable surfactants
- Excellent penetration and fast drying
- Virtually no odour
- Non-flammable
Application
Place 167g sachet into 5 litres of water and allow to dissolve for 2-3
minutes then add mix to another 20 litres of water and mix well prior
to application. Sterilise all exposed wall areas with two coats of diluted fluid to the
joints, followed by an overall surface application, using brush or
coarse spray (Do not use atomiser sprays).
Oversites should be thoroughly sprayed until saturated with fluid.
However, where severe attacks of dry rot in masonry have occurred we
recommend the following traditional irrigation treatment. The wall
should be drilled deeply (two-thirds depth) at 23 cm (9") staggered
centres at a downward angle to ensure full penetration of the fluid.
N.B. Irrigation should only be undertaken when there is demonstrable need for deep penetration of fluid
Coverage
1 litre of diluted product treats 2-5m² using a course spray.
Using Irrigation treat at 2.5 litre per m² for 230mm (9") brickwork or 10 litre per m³.
Formulation
3-Iodo-2-Propynyl-n-Butyl-Carbamate (IPBC) 15% (w/w).
Product Data Sheets
Technical Data Sheet Safety Data SheetOther Information
This product carries the
HSE Approval No 8142.
