Product Description
Platinum Epoxy Coating WB is a two-part, general purpose, water dispersed epoxy resin coating system. It is solvent free, non-flammable, odourless and non-toxic when dry.
Platinum Epoxy Coating WB is specifically designed for use as a low cost coating/sealer for the protection of concrete.
Advantages
- User Friendly - Solvent free.
- Non slip.
- Non toxic.
- Easy to apply.
- Excellent adhesion on dry or damp surfaces.
Application
Preparation: All surfaces must be sound, clean and free from grease, oil, dirt or other contaminants. Mould release agents and any wax/resin based concrete curing compounds should be removed prior to application. Damp down porous surfaces.
Mixing: Use a slow speed stirrer to mix the resin and hardener and mix for 3-5 minutes until a uniform colour, homogeneous emulsion is obtained. Up to 10% water may be added for pre-sealing or spraying though this will reduce film thickness and is not generally recommended.
Placement: Apply by brush/roller using standard painting techniques. Two coats are required to achieve optimum protection. The second coat should be applied when the first coat is `touch dry' in approximately 3-4 hours. Platinum Epoxy Coating WB should never be applied when ambient or substrate temperature is less than 5°C.
Coverage
6-8 m² per litre per coat (2 coats recommended)
.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
