Product Description
Opti-Mix 3 in 1 Render Additive is a highly concentrated waterproofing, plasticizing and retarding admixture for sand and cement mixes.
Opti-Mix 3 in 1 Render Additive provides long term protection from water damage to mortar, concrete, renders and screeds by reducing water permeability. The product also contains air entraining, plasticising agents hence it will not “deaden” the mix and there is no need to add a separate admix.
The “retarding properties of Opti-Mix 3 in 1 Render Additive provide longer “working times” of mortars where increased mixed sizes can be prepared.
Benefits
- Concentrated formula - 1 Litre is equivalent to 25 Litre of standard Render Additive.
- Easy to use gauged bottle.
- Improves water resistance of
mortars.
- Added plasticising agent improves workability
- Helps
to reduce salt permeation.
- Retards the initial set of mortar
mixes.
Application
Shake bottle well before use. Push the lid downwards and twist anti-clockwise to remove. Squeeze the sides of the bottle to fill the measuring cup to the required dose (25-50ml per 25kg of cement).
Add Opti-Mix 3 in 1 Render Additive to a bucket of water and stir/mix well (use up to a maximum 10ltrs of water). then add to the empty mixer, followed by the sand and cement.
Always ensure that minimal gauging water is used to the early stages of the mix and add water at the end, when all materials have been added to achieve the required consistency. Do not use below 2 degrees C.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
