Product Description
Newton 803 is a non-meshed high quality damp proofing membrane for use above the ground. It can be used as an alternative to Newton 805 Newlath and Newton 503 Mesh where a meshed surface is not required as a surface for direct plastering or rendering..
Newton 803 is typically used where the wall finish to the damp-proof
membrane is timber battens, a dry-lining frame or block wall. Newton 803
is 0.5mm thick and has a pattern of raised 3mm studs. The studs face
the wall and create air channels that allow for vapour equalisation to
take place between the membrane and the wall.
Newton 803 is light, clean and easy to handle. It can be cut with a
sharp knife, scissors or shears. The membrane is inert and is highly
resistant to water, alkalies, saline solutions and organic acids, and it
is not affected by minerals. It is also resistant to bacteria, fungi
and other small organisms.
Newton 803 is guaranteed against deterioration for 30 years, and has a
life expectancy of at least 50 years (DIN 9001:2000).
Product Data Sheets
Technical Data Sheet
Other Information
This Product is BBA Approved. Agrément Certificate No:
94/3010.
