Product Description
A high strength bonding system comprising a cyanoacyrylate adhesive with an aerosol activator to ensure full and rapid curing on acid surfaces. Can be used for bonding MDF, wood, rubber and most plastics.
Benefits
- Flash setting formulation - bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
- High viscosity adhesive - low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces (eg wood)
- Gap filling - high viscosity adhesive will fill small gaps in mitres etc (up to 0.2mm)
- Economical in use.
Application
The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants.
Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of 50% +.
Spray one surface with activator. Apply adhesive sparingly to other surface. Bring together, position and hold for about 10 seconds.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
