Product Description
A ready to use, Water Resistant D3 Wood Adhesive which is suitable for use in damp and humid conditions.
Duo '2 in 1' Wood adhesive meets the requirements of BS 4701Creep Resistance standard and EN 204 D3. It is also suitable for use with RF bonding machinery.
Product Uses
Duo '2 in 1' Wood adhesive can be used as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive.
Suitable for hard and soft woods, decorative laminates, chipboard blockwood and other engineered timber panels.
Not suitable for permanent immersion in water.Application
Apply the adhesive to one surface only and bring the two surfaces together within 3-4 minutes and clamp for approximately 1 hour.
After 1 hour careful handling is permittable. Glued components should be left overnight before machining. Remove excess adhesive whilst wet using a damp cloth.
When using RF bonding techniques the user must explore the most efficient combination of glue application, power and dwell time as each of these varies with different machinery and constructions.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
