Product Description
Brunosol Concentrate 6X is a water soluble surface biocide based on Sodium 2-phenyl phenoxide for use in the treatment of masonry and brickwork for dry rot (Serpula lacrymans).
Whilst Serpula Lacrymans does not derive nutrient from brickwork or masonry, viable spores or dormant vegetative growth within the structure can act as a source of re-infestation unless contained or eradicated. Brunosol Concentrate 6X fulfills this purpose by providing a biocidal barrier within the wall.
Approved under the Control of Pesticides Regulations 1986.
FOR USE ONLY AS A BIOCIDE BY PROFESSIONAL OPERATORS.
Advantages
- Dilutes to make 25 litres of working strength solution.
- Instantaneous action against dry rot
- Deep penetration in masonry
- Non-flammable
Application
Dilute 1 part Brunosol Concentrate 6X with 5 parts water. A 4.2 litre bottle should be diluted to produce 25 litres of working strength solution, rinse container prior to disposal.
For information on application on Walls and Floors please view
Technical Data Sheet (at bottom of page).
WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS) AND SYNTHETIC RUBBER/PVC GLOVES PLUS EYE PROTECTION WHEN DILUTING OR SPRAYING OVERHEAD. AVOID EXCESSIVE CONTAMINATION OF COVERALLS AND LAUNDER REGULARLY. COVER WATER STORAGE TANKS BEFORE APPLICATION. DO NOT BREATHE SPRAY MIST. WHEN USING DO NOT EAT, DRINK OR SMOKE, DO NOT CONTAMINATED WATERCOURSES OR GROUND, PREVENT ANY SURFACE RUN-OFF FROM ENTERING DRAINS
Coverage
1 litre of dulited product treats 2-5m², 10 litres/m³.
Formulation
Sodium Phenylphenoxide 27.53% (w/w).
Product Data Sheets
Technical Data Sheet Safety Data SheetOther Information
This product carries the
HSE Approval No 7325.
