Product Description
An acid based cleaner formulated to remove unsightly stains caused by numerous every day occurrences, as well as builders splatter.
Product Uses
For removing cement and mortar splashes, light oil stains and grease from brickwork, paving, tiles, earthenware and concrete.
Brick & Patio Cleaner should not interfere with the various types of concrete and stone (except limestone and marble) commonly encountered in the general building area.
Efflorescence can also be removed by using this product diluted.
Application
Gloves, overalls, boots and goggles should be worn at all times during application.
Protect metal surfaces and paint-work before application with polythene sheets and tape. Remove excess dirt, mortar, etc. with a stiff yard brush. If cleaning down brickwork saturate area with water to prevent damage to mortar.
Before commencing a full clean down, test on an inconspicuous area with Brick & Patio Cleaner diluted 2:1, water to cleaner. For normal use dilute between 2 and 4 parts water to 1 part cleaner.
Apply using a low pressure hose or by brush and allow to stand for 10-15 minutes ensuring the area does not dry out and is scrubbed occasionally with a stiff yard brush.
Rinse thoroughly with large amounts of water, do not add water to neat cleaner, always add the cleaner to the water. If stains persist, repeat the process and/or use the cleaner undiluted taking care to test the neat cleaner first on an inconspicuous area.
For removing efflorescence use a 4:1 dilution water to cleaner.
Always use a plastic container for diluting this product.
Coverage
Approximately 15-30mē per 5 Litres.
Health & Safety
Contains 9% Hydrochloric Acid.
Product Data Sheets
Technical Data Sheet Safety
Data Sheet
