Product Description
A highly penetrative, thin bituminous solution, black in colour.
Use Bitumen Primer for priming surfaces prior to the application of bituminous materials.
Bitumen Primer can be used to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, mastic asphalt, weathered corrugated iron and steel. It is the recommended primer for use with the 'Bitumen Products' range of bituminous roof coatings, flashing tapes or mastics.
Application
Apply by brush or spray. Using a brush, scrub the primer into the surface.
Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2-3 hours before continuing with further work.
With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface.
Coverage
1 litre will cover 4-10mē depending on porosity.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
