Product Description
A solvent-borne, bituminous black paint. When dry it forms an odourless and taint-free bitumen film.
Bitumen Paint is used for the protection of ferrous and non-ferrous metals, concrete, roofing felt, fibre/cement, corrugated iron, asphalt and wood, against water. Reduces corrosion and decay.
NB. DO NOT USE OVER TAR BASED PRODUCTS OR IF SURFACE TEMPERATURES CAN RISE ABOVE 65
oC (149
oF).
Application
Bitumen Paint is supplied ready for use and should not require thinning. Apply at least two coats by brush or spray allowing each coat to dry before applying the next coat.
Note: At very low service temperatures the coating will become less flexible, while at high temperatures it becomes soft and less resistant to degradation by the environment, and will ultimately flow.
Water Tanks: Apply a minimum of two coats allowing at least 24 hours for drying between each coat. This may take longer depending on conditions. Thoroughly wash out the tank with clean cold water after the final coat has dried.
Coverage
1 litre will cover approximately 4-6mē.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
