Product Description
A solvent-borne, bituminous compound of a high build consistency containing a small percentage of fibrous filler. Dries to a tough, black coating.
All Weather Roofing Compound is used as a heavy brush coating for roof waterproofing and the resealing of existing roofs of mastic asphalt, roofing felt, corrugated iron and fibre/cement slates, lead, copper and zinc. Recommended where the threat of frost or rain precludes the use of an emulsion.
Application
STIR WELL BEFORE USE. Apply All Weather Roofing Compound by with each coat at right angles to the previous one, at a maximum rate of 0.70 litres per mē. Allow each coat to dry thoroughly. Where necessary reinforce with either an open woven glass fibre membrane or an open mesh polyester membrane.
Note: this material should only be applied to surfaces that are completely dry and great care should be taken to ensure that when applied to bitumen felt, no moisture is contained within the felt.
In order to prolong the effective life of the dried coating, it is recommended that it can be overcoated with a suitable decorative solar reflective paint.
Coverage
1 litre will cover approximately 1.4mē per coat. Two coats give a dried layer of approximately 0.7mm.
Product Data Sheets
Technical Data Sheet Safety Data Sheet
